PC 용 MyWatchdog Surveillance System

호환되는 PC 앱 또는 대안 확인

소프트웨어	다운로드	평점	개발자
MyWatchdog Surveillance System	PC 앱 받기	/5 0 리뷰	Ralf Andrae

1 : Windows 용 Android 소프트웨어 에뮬레이터 다운로드

에뮬레이터의 중요성은 컴퓨터에서 안드로이드 환경을 흉내 내고 안드로이드 폰을 구입하지 않고도 안드로이드 앱을 설치하고 실행하는 것을 매우 쉽게 만들어주는 것입니다. 누가 당신이 두 세계를 즐길 수 없다고 말합니까? 우선 아래에있는 에뮬레이터 앱을 다운로드 할 수 있습니다.
A. Nox App . OR
B. Bluestacks App .
Bluestacks는 매우 대중적이므로 개인적으로 "B"옵션을 사용하는 것이 좋습니다. 문제가 발생하면 Google 또는 Naver.com에서 좋은 해결책을 찾을 수 있습니다. 

2 : 이제 Windows PC에 소프트웨어 에뮬레이터 설치

Bluestacks.exe 또는 Nox.exe를 성공적으로 다운로드 한 경우 컴퓨터의 다운로드 폴더 또는 다운로드 한 파일을 일반적으로 저장하는 곳으로 이동하십시오.
찾으면 클릭하여 응용 프로그램을 설치하십시오. PC에서 설치 프로세스를 시작해야합니다.
다음을 클릭하여 EULA 라이센스 계약에 동의하십시오.
응용 프로그램을 설치하려면 화면 지시문을 따르십시오.
위 사항을 올바르게 수행하면 소프트웨어가 성공적으로 설치됩니다.

3 : Windows PC 용 MyWatchdog Surveillance System 사용 방법 - Windows 7/10/11

이제 설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 지금 입력하십시오. - MyWatchdog Surveillance System 앱을 쉽게 볼 수 있습니다. 그것을 클릭하십시오. 응용 프로그램 창이 열리고 에뮬레이터 소프트웨어에 응용 프로그램이 표시됩니다. 설치 버튼을 누르면 응용 프로그램이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
그런 다음 "모든 앱"아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 MyWatchdog Surveillance System 상. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.

Mac OS 에서 MyWatchdog Surveillance System 다운로드

개발자 설명

"MyWatchdog" turns your iPhone and up to seven other iOS devices into a reliable and professional alarm system. Your iPhone serves as a "monitor". The monitor is the "control center" of the alarm system. You can use this to turn the system on and off and to receive alarms from the sensors. You can use older, no-longer-used iPhones or iPads with iOS 8 or later as sensors. Place the sensors in rooms to be monitored, in objects, in your apartment, or in your vehicle. HIGHLIGHTS ● "MyWatchdog" uses your iCloud account * For the use of "MyWatchdog" - unlike other apps - neither a special account nor entering an e-mail address is required. All recorded data (logs, audio and video recordings) will be exclusively managed, transported, cached and deleted from the iCloud after downloading to your iPhone, in the private area of your iCloud account. You do not need a subscription to use it or you have to endure advertising. ● "MyWatchdog" monitors movements of the sensor (rotation, inclination, acceleration, etc. - the sensitivity is adjustable), detects noises (also with adjustable sensitivity), and has intelligent sophisticated video surveillance including person detection and tracking and a detector for object movements. For video surveillance, you can use the front or rear camera (with the video light if needed). ● As soon as an alarm event occurs, you will be notified immediately with a push message. If you want, the sensors can also send an SMS to any mobile phone **. This will allow you to automatically request assistance from a third party during a burglary, even if you are not around. In the event of an alarm, it is even possible to have a sensor a prerecorded message from you read by a sensor by to warn the intruder: "The cash register is empty! Burglary is not worth it! The police are on their way!" ● All alarm events are recorded automatically (audio, video and video recording, motion profile). With your iPhone (monitor) you can view the events and forward with one click. If you have an Apple Watch, you can also view all audio and video recordings and the tracking log on it. ● With Live View **, you have a direct line to each of your sensors, and you can hear 24/7 and see what's going on in your house. From the live broadcast, you can create a recording with one click. You start Live View by a swiping to the left on the desired sensor in the overview. ● Activating and deactivating your alarm system is done centrally with your iPhone configured as a monitor or from your Apple Watch. But you can also use the "AUTO" function ***: If you are near a sensor with your monitor, this sensor will automatically be switched off. If you move away from a sensor, it will be reactivated. So you avoid a false alarm and do not forget to activate your alarm system. ● Easiest installation: Select the monitor mode on your iPhone and the sensor mode **** on the "old" device. Using the sensor, scan the barcode from the monitor. Both devices will then be registered with your Apple ID in your iCloud. You can now individually set, activate and deactivate each of the registered sensors to your needs (from the monitor). * Important: Your monitor and sensors must use the same Apple ID to communicate through your iCloud account. ** Additional option, via In App Purchase *** Requires enabled "Location services in the background" and Bluetooth sharing **** The video and audio monitoring of the sensor runs exclusively in the foreground of the app. Use your charger for the power supply!