Jetting for Suzuki RM 2T Moto

PC 용 Jetting for Suzuki RM 2T Moto



다운로드 링크

앱 다운로드 ⇩

Jetting for Suzuki RM 2T Moto PC 용 미리보기

Jetting for Suzuki RM 2T Moto PC 용  Jetting for Suzuki RM 2T Moto PC 용  Jetting for Suzuki RM 2T Moto PC 용  Jetting for Suzuki RM 2T Moto PC 용  Jetting for Suzuki RM 2T Moto PC 용  Jetting for Suzuki RM 2T Moto PC 용  Jetting for Suzuki RM 2T Moto PC 용  Jetting for Suzuki RM 2T Moto PC 용  Jetting for Suzuki RM 2T Moto PC 용  

Windows PC에서 Jetting for Suzuki RM 2T Moto를 다운로드하여 설치하고 즐기십시오.

사용 Jetting for Suzuki RM 2T Moto 귀하의 Windows 컴퓨터에서 실제로 매우 쉽습니다하지만 당신 이이 과정을 처음 접한다면, 당신은 분명히 아래 나열된 단계에주의를 기울일 필요가있을 것입니다. 컴퓨터 용 데스크톱 응용 프로그램 에뮬레이터를 다운로드하여 설치해야하기 때문입니다. 다운로드 및 설치를 도와 드리겠습니다 Jetting for Suzuki RM 2T Moto 아래의 간단한 4 단계로 컴퓨터에서:


1 : Windows 용 Android 소프트웨어 에뮬레이터 다운로드

에뮬레이터의 중요성은 컴퓨터에서 안드로이드 환경을 흉내 내고 안드로이드 폰을 구입하지 않고도 안드로이드 앱을 설치하고 실행하는 것을 매우 쉽게 만들어주는 것입니다. 누가 당신이 두 세계를 즐길 수 없다고 말합니까? 우선 아래에있는 에뮬레이터 앱을 다운로드 할 수 있습니다.
A. Nox App . OR
B. Bluestacks App .
Bluestacks는 매우 대중적이므로 개인적으로 "B"옵션을 사용하는 것이 좋습니다. 문제가 발생하면 Google 또는 Naver.com에서 좋은 해결책을 찾을 수 있습니다. 


2 : 이제 Windows PC에 소프트웨어 에뮬레이터 설치

Bluestacks.exe 또는 Nox.exe를 성공적으로 다운로드 한 경우 컴퓨터의 다운로드 폴더 또는 다운로드 한 파일을 일반적으로 저장하는 곳으로 이동하십시오.
찾으면 클릭하여 응용 프로그램을 설치하십시오. PC에서 설치 프로세스를 시작해야합니다.
다음을 클릭하여 EULA 라이센스 계약에 동의하십시오.
응용 프로그램을 설치하려면 화면 지시문을 따르십시오.
위 사항을 올바르게 수행하면 소프트웨어가 성공적으로 설치됩니다.


3 : Windows PC 용 Jetting for Suzuki RM 2T Moto 사용 방법 - Windows 7/8 / 8.1 / 10

이제 설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 지금 입력하십시오. - Jetting for Suzuki RM 2T Moto 앱을 쉽게 볼 수 있습니다. 그것을 클릭하십시오. 응용 프로그램 창이 열리고 에뮬레이터 소프트웨어에 응용 프로그램이 표시됩니다. 설치 버튼을 누르면 응용 프로그램이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
그런 다음 "모든 앱"아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 Jetting for Suzuki RM 2T Moto 상. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.


보너스 : Android 및 iOS 용 다운로드

Android에서 다운로드

정보 Jetting for Suzuki RM 2T Moto

개발자 설명

1989-2021 models This app is using temperature, altitude, humidity, atmospheric pressure and your engine configuration for calculate optimal jetting (carburetor configuration) and spark plug to use for Suzuki RM 2-strokes MX (Motocross), Enduro, Dirt bikes. This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station thought internet. Internal barometer is used on supported devices for better precision. If more accuracy is needed, a portable weather station can also be used. Application can run without GPS, WiFi and internet, in this case user has to give the weather data manually. • For each carburetor configuration, the following values are given: main jet, needle type, needle position, pilot jet, air screw position, throttle valve size, spark plug • Fine tuning for all these values • History of all your jetting setups • Graphic display of fuel mix quality (Air/Flow Ratio or Lambda) • Selectable fuel type (gasoline with or without ethanol, Racing fuels available, for example: VP C12, VP 110, VP MRX02) • Adjustable fuel/oil ratio • Mix wizard to get the perfect mix ratio (fuel calculator) • Carburetor ice warning • Possibility of use automatic weather data or a portable weather station • If you don't want to share your location, you can manually select any place in the world, the carburetor setups will be adapted for this place • let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, liters, ml, gallons, oz for fuel, and mb, hPa, mmHg, inHg atm for pressures Valid for the following 2T models from 1989 to 2021: • RM60 • RM65 • RM80 • RM85 • RM100 • RM112 • RM125 • RM250 The application contains four tabs, which are described next: • Results: In this tab main jet, needle type, needle position, pilot jet, air screw position, throttle valve, spark plug are shown. These data are calculated depending on the weather conditions and the engine configuration given in the next tabs. This tab lets do a fine tuning adjustment for all this values to adapt to the concrete engine. Besides this jetting information, the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE- relative horsepower, volumetric content of oxygen, oxygen pressure are shown too. On this tab, you can also share your settings with your colleagues, or add settings to your favorites. You can also see in a graphic form the calculated ratio of air and fuel (lambda). • History: This tab contains the history of all carburetor setups. If you change the weather, or engine setup, or fine tuning, the new setup will be saved in history. This tab also contains your favorite settings. • Engine: You can configure in this screen the information about the engine, that is, engine model, year, spark manufacturer, fuel type, oil mix ratio. • Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity. Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service (you can choose one weather data source from several possible) to get the weather conditions of the nearest weather station (temperature, pressure and humidity). In addition, this application can work with a pressure sensor built into the iPhone. You can see if it is available on your device and turn it on or off. Also, on this tab, you can manually select any place in the world, the carburetor setups will be adapted for this place. Moreover, on this tab, you can enable alerts about possible carburetor icing. If you have any doubt about using this App, please, contact us. We answer every question, and we take care of all comments from our users to try to improve our software. We are also users of this application.

keyboard_arrow_up